Difference between revisions of "Collection of example input files"
(→Simple examples) |
(→Simple 2D assembly geometry examples) |
||
| Line 5: | Line 5: | ||
! Files | ! Files | ||
! Notes | ! Notes | ||
| + | ! Added by | ||
| + | ! Date | ||
|- | |- | ||
| 2D BWR fuel assembly geometry | | 2D BWR fuel assembly geometry | ||
| [[2D BWR fuel assembly geometry|Serpent input file]] | | [[2D BWR fuel assembly geometry|Serpent input file]] | ||
| Demonstrates basic features for geometry, material and detector definitions | | Demonstrates basic features for geometry, material and detector definitions | ||
| + | | JLE/VTT | ||
| + | | 15/11/26 | ||
|- | |- | ||
| 2D CANDU fuel bundle geometry | | 2D CANDU fuel bundle geometry | ||
| [[2D CANDU fuel bundle geometry|Serpent input file]] | | [[2D CANDU fuel bundle geometry|Serpent input file]] | ||
| Demonstrates the circular array structure | | Demonstrates the circular array structure | ||
| + | | JLE/VTT | ||
| + | | 15/11/26 | ||
|- | |- | ||
| 2D VVER-440 fuel assembly geometry | | 2D VVER-440 fuel assembly geometry | ||
| [[2D VVER-440 fuel assembly geometry|Serpent input file]] | | [[2D VVER-440 fuel assembly geometry|Serpent input file]] | ||
| Demonstrates the hexagonal lattice and calculation of flux and reaction rate spectra | | Demonstrates the hexagonal lattice and calculation of flux and reaction rate spectra | ||
| + | | JLE/VTT | ||
| + | | 15/11/26 | ||
|- | |- | ||
| 2D PWR MOX/UOX lattice geometry | | 2D PWR MOX/UOX lattice geometry | ||
| [[2D PWR MOX/UOX lattice geometry|Serpent input file]] | | [[2D PWR MOX/UOX lattice geometry|Serpent input file]] | ||
| Demonstrates the use of two nested lattices (pins in assembly and assemblies in colorset) | | Demonstrates the use of two nested lattices (pins in assembly and assemblies in colorset) | ||
| + | | JLE/VTT | ||
| + | | 15/11/26 | ||
|} | |} | ||
Revision as of 18:24, 26 November 2015
Contents
Simple 2D assembly geometry examples
| Description | Files | Notes | Added by | Date |
|---|---|---|---|---|
| 2D BWR fuel assembly geometry | Serpent input file | Demonstrates basic features for geometry, material and detector definitions | JLE/VTT | 15/11/26 |
| 2D CANDU fuel bundle geometry | Serpent input file | Demonstrates the circular array structure | JLE/VTT | 15/11/26 |
| 2D VVER-440 fuel assembly geometry | Serpent input file | Demonstrates the hexagonal lattice and calculation of flux and reaction rate spectra | JLE/VTT | 15/11/26 |
| 2D PWR MOX/UOX lattice geometry | Serpent input file | Demonstrates the use of two nested lattices (pins in assembly and assemblies in colorset) | JLE/VTT | 15/11/26 |
Simple burnup examples
Special running modes, etc.
| Description | Files | Notes |
|---|---|---|
| Pu-flattop and STACY critical experiments (PU-MET-FAST-006 and LEU-SOL-THERM-007) from the ICSBEP Handbook[1] | Serpent and MCNP input files | Used for demonstarting the dynamic simulation mode introduced at the M&C 2013 conference[2] |
References
- ^ https://www.oecd-nea.org/science/wpncs/icsbep/handbook.html
- ^ Leppänen, J. "Development of a dynamic simulation mode in the Serpent 2 Monte Carlo code." In proc. M&C 2013, Sun Valley, ID, May 5-9, 2013.
