Difference between revisions of "Collection of example input files"
(→Simple burnup examples) |
(→Group constant generation) |
||
| Line 69: | Line 69: | ||
| 2D PWR assembly | | 2D PWR assembly | ||
| [[2D PWR pin-cell burnup example|Serpent input file]] | | [[2D PWR pin-cell burnup example|Serpent input file]] | ||
| − | | Demonstrates automated burnup sequence | + | | Demonstrates the use of the automated burnup sequence |
| JLe / VTT | | JLe / VTT | ||
| 16/02/21 | | 16/02/21 | ||
Revision as of 14:00, 21 February 2016
Contents
Simple 2D assembly geometry examples
| Description | Files | Notes | Added by | Date |
|---|---|---|---|---|
| 2D BWR fuel assembly geometry | Serpent input file | Demonstrates basic features for geometry, material and detector definitions | JLe / VTT | 15/11/26 |
| 2D CANDU fuel bundle geometry | Serpent input file | Demonstrates the circular array structure | JLe / VTT | 15/11/26 |
| 2D VVER-440 fuel assembly geometry | Serpent input file | Demonstrates the hexagonal lattice and calculation of flux and reaction rate spectra | JLe / VTT | 15/11/26 |
| 2D PWR MOX/UOX lattice geometry | Serpent input file | Demonstrates the use of two nested lattices (pins in assembly and assemblies in colorset) | JLe / VTT | 15/11/26 |
Simple burnup examples
| Description | Files | Notes | Added by | Date |
|---|---|---|---|---|
| 2D PWR pin-cell burnup example | Serpent input file | Demonstrates basic burnup input | JLe / VTT | 15/11/30 |
| 2D PWR assembly burnup example | Serpent input file | 17x17 assembly with burnable absorber, "Serpent 1" style division into depletion zones | JLe / VTT | 15/11/30 |
| 2D PWR assembly burnup example | Serpent input file | 17x17 assembly with burnable absorber, division into depletion zones using the div card | JLe / VTT | 15/11/30 |
Group constant generation
| Description | Files | Notes | Added by | Date |
|---|---|---|---|---|
| 2D PWR assembly | Serpent input file | Demonstrates the use of the automated burnup sequence | JLe / VTT | 16/02/21 |
Miscellaneous
| Description | Files | Notes | Added by | Date |
|---|---|---|---|---|
| Pu-flattop and STACY critical experiments (PU-MET-FAST-006 and LEU-SOL-THERM-007) from the ICSBEP Handbook[1] | Serpent and MCNP input files | Used for demonstarting the dynamic simulation mode introduced at the M&C 2013 conference[2] | JLe / VTT | 15/11/26 |
References
- ^ https://www.oecd-nea.org/science/wpncs/icsbep/handbook.html
- ^ Leppänen, J. "Development of a dynamic simulation mode in the Serpent 2 Monte Carlo code." In proc. M&C 2013, Sun Valley, ID, May 5-9, 2013.
