Difference between revisions of "Collection of example input files"
(→Simple burnup examples) |
(→Simple burnup examples) |
||
| Line 55: | Line 55: | ||
| 2D PWR assembly burnup example | | 2D PWR assembly burnup example | ||
| [[2D PWR assembly burnup example (division with div-card)|Serpent input file]] | | [[2D PWR assembly burnup example (division with div-card)|Serpent input file]] | ||
| − | | 17x17 assembly with burnable absorber, division into depletion zones using the [[Input syntax manual#div | + | | 17x17 assembly with burnable absorber, division into depletion zones using the [[Input syntax manual#div (divisor definition)|div card]] |
| JLe / VTT | | JLe / VTT | ||
| 15/11/30 | | 15/11/30 | ||
Revision as of 23:16, 30 November 2015
Contents
Simple 2D assembly geometry examples
| Description | Files | Notes | Added by | Date |
|---|---|---|---|---|
| 2D BWR fuel assembly geometry | Serpent input file | Demonstrates basic features for geometry, material and detector definitions | JLe / VTT | 15/11/26 |
| 2D CANDU fuel bundle geometry | Serpent input file | Demonstrates the circular array structure | JLe / VTT | 15/11/26 |
| 2D VVER-440 fuel assembly geometry | Serpent input file | Demonstrates the hexagonal lattice and calculation of flux and reaction rate spectra | JLe / VTT | 15/11/26 |
| 2D PWR MOX/UOX lattice geometry | Serpent input file | Demonstrates the use of two nested lattices (pins in assembly and assemblies in colorset) | JLe / VTT | 15/11/26 |
Simple burnup examples
| Description | Files | Notes | Added by | Date |
|---|---|---|---|---|
| 2D PWR pin-cell burnup example | Serpent input file | Demonstrates basic burnup input | JLe / VTT | 15/11/30 |
| 2D PWR assembly burnup example | Serpent input file | 17x17 assembly with burnable absorber, "Serpent 1" style division into depletion zones | JLe / VTT | 15/11/30 |
| 2D PWR assembly burnup example | Serpent input file | 17x17 assembly with burnable absorber, division into depletion zones using the div card | JLe / VTT | 15/11/30 |
Miscellaneous
| Description | Files | Notes | Added by | Date |
|---|---|---|---|---|
| Pu-flattop and STACY critical experiments (PU-MET-FAST-006 and LEU-SOL-THERM-007) from the ICSBEP Handbook[1] | Serpent and MCNP input files | Used for demonstarting the dynamic simulation mode introduced at the M&C 2013 conference[2] | JLe / VTT | 15/11/26 |
References
- ^ https://www.oecd-nea.org/science/wpncs/icsbep/handbook.html
- ^ Leppänen, J. "Development of a dynamic simulation mode in the Serpent 2 Monte Carlo code." In proc. M&C 2013, Sun Valley, ID, May 5-9, 2013.
