Pitfalls and troubleshooting

From Serpent Wiki
Revision as of 17:34, 19 November 2015 by Jaakko Leppänen (Talk | contribs) (Mass vs. atomic densities)

Jump to: navigation, search

Things to check in case of suspicious results

Unresolved resonance probability table sampling

Unresolved resonance probability table sampling is not used by default. This method is needed to account for self-shielding effects in the unresolved resonance region. The effect is usually not significant in thermal systems, but can lead to noticeable discrepancies in fast-spectrum systems.

Probability table sampling is switched on using the set ures option.

Mass vs. atomic densities

The densities and compositions of materials can be entered in atomic (positive values) or mass units (negative values), and using incorrect units may lead to unexpected results. The difference may not be clearly noticeable if the material consists nuclides with similar atomic weight, but if there are both light and heavy nuclides the results can be off by tens of percent.

In particular using incorrect units for isotopes in water causes a major distortion in flux spectrum. In burnup calculation this is reflected in the depletion rate of 235U and build-up rate of 239Pu.