Collection of example input files

From Serpent Wiki
Revision as of 20:24, 30 November 2015 by Jaakko Leppänen (Talk | contribs) (Simple burnup examples)

Jump to: navigation, search

Simple 2D assembly geometry examples

Description Files Notes Added by Date
2D BWR fuel assembly geometry Serpent input file Demonstrates basic features for geometry, material and detector definitions JLe / VTT 15/11/26
2D CANDU fuel bundle geometry Serpent input file Demonstrates the circular array structure JLe / VTT 15/11/26
2D VVER-440 fuel assembly geometry Serpent input file Demonstrates the hexagonal lattice and calculation of flux and reaction rate spectra JLe / VTT 15/11/26
2D PWR MOX/UOX lattice geometry Serpent input file Demonstrates the use of two nested lattices (pins in assembly and assemblies in colorset) JLe / VTT 15/11/26

Simple burnup examples

Description Files Notes Added by Date
2D PWR pin-cell burnup example Serpent input file Demonstrates basic burnup input JLe / VTT 15/11/30
2D PWR assembly burnup example Serpent input file 17x17 assembly with burnable absorber, "Serpent 1 style" division into depletion zones JLe / VTT 15/11/30

Miscellaneous

Description Files Notes Added by Date
Pu-flattop and STACY critical experiments (PU-MET-FAST-006 and LEU-SOL-THERM-007) from the ICSBEP Handbook[1] Serpent and MCNP input files Used for demonstarting the dynamic simulation mode introduced at the M&C 2013 conference[2] JLe / VTT 15/11/26

References

  1. ^ https://www.oecd-nea.org/science/wpncs/icsbep/handbook.html
  2. ^ Leppänen, J. "Development of a dynamic simulation mode in the Serpent 2 Monte Carlo code." In proc. M&C 2013, Sun Valley, ID, May 5-9, 2013.