UGM 2016 Moving geometry
Revision as of 12:52, 23 September 2016 by Ville Valtavirta (talk | contribs) (→Time limits for transformations)
This page will contain stuff for the moving geometry example for the UGM 2016 presentation.
Basics of transformations
 Control rod initial position. |
 Control rod movement. Initial upwards velocity of 750 cm/s. Initial downwards acceleration of 981 m/s^2. Simulation time of 2 seconds with 500 time intervals. |
Time limits for transformations
 Control rod movement. Upwards acceleration of 1000 cm/s^2 from 0.1 to 0.5 seconds followed by downwards acceleration of 1000 cm/s^2 from 0.5 to 0.9. Simulation time of 2 seconds with 250 time intervals. Ttype 1. |
 Control rod movement. Upwards acceleration of 1000 cm/s^2 from 0.1 to 0.5 seconds followed by downwards acceleration of 1000 cm/s^2 from 0.5 to 0.9. Simulation time of 2 seconds with 250 time intervals. Ttype 2. |
 Control rod movement. Upwards acceleration of 1000 cm/s^2 from 0.1 to 0.5 seconds followed by downwards acceleration of 1000 cm/s^2 from 0.5 to 0.9. Simulation time of 2 seconds with 250 time intervals. Ttype 3. |
