Difference between revisions of "Universe-based geometry type in Serpent"
(Created page with "= Notation = From here on it is assumed that the tracking takes place in a three-dimensional Cartesian coordinate system. In vector notation, the position and direction of m...") |
(No difference)
|
Revision as of 21:04, 8 March 2016
Notation
From here on it is assumed that the tracking takes place in a three-dimensional Cartesian coordinate system. In vector notation, the position and direction of motion are defined by two vectors:
and
where , and are the unit vectors defining the three-dimensional Cartesian coordinate system. Direction vector is normalized to unity:
or
Coefficients , and are the direction cosines, i.e. the cosines of the angle that vector forms with the positive x-, y- and z-axis, respectively.
Surfaces
Monte Carlo transport codes are most typically based on the constructive solid geometry (CSG) type, in which the geometry is composed of homogeneous material cells, defined using combinations of elementary and derived surface types.
The most elemental building block is the surface, described using algebraic equations, typically of the quadratic type. The action that puts an arbitrary position on one or the other side of a surface is based on a simple test carried out by substituting the coordinates into the surface equation:
This surface test also fixes the concepts of ``inside and ``outside for each surface type, which is important when forming the cells from the surface combinations.
The general quadratic surface can be written in parametric form as:
where and are constants. Common examples of quadratic surfaces obtained from the parametrized quadratic equation include the plane perpendicular to x-axis at :
sphere centered at with radius :
and straight infinite cylinder parallel to z-axis centered at with radius :
There are also non-quadratic surfaces, such as the torus, for which the surface test cannot be performed by substituting the coordinates into a single equation.
Monte Carlo codes often provide additional derived surface types, which are formed by combinations of elementary surfaces. For example, a cuboid with boundaries , , consists of six planes perpendicular to the coordinate axes, and surface test works by testing the position of the point with respect to all of them. Other derived surface types convenient for reactor modeling include truncated cylinders, and square and hexagonal prisms.