FINIX PB2 example input: Difference between revisions
Jump to navigation
Jump to search
Created page with "The input model is based on the Peach Bottom 2 BWR assembly from the UAM benchmark <ref>Ivanov et al. "''BENCHMARKS FOR UNCERTAINTY ANALYSIS IN MODELLING (UAM) FOR THE DESIGN,..." |
No edit summary |
||
| Line 1: | Line 1: | ||
The input model is based on the Peach Bottom 2 BWR assembly from the UAM benchmark | The input model is based on the Peach Bottom 2 BWR assembly from the UAM benchmark | ||
<ref>Ivanov et al. "''BENCHMARKS FOR UNCERTAINTY ANALYSIS IN MODELLING (UAM) FOR THE DESIGN, OPERATION AND SAFETY ANALYSIS OF LWRs, Volume I: Specification and Support Data for Neutronics Cases (Phase I), Version 2.1''", NEA/NSC/DOC(2013)7</ref> | <ref>Ivanov et al. "''BENCHMARKS FOR UNCERTAINTY ANALYSIS IN MODELLING (UAM) FOR THE DESIGN, OPERATION AND SAFETY ANALYSIS OF LWRs, Volume I: Specification and Support Data for Neutronics Cases (Phase I), Version 2.1''", NEA/NSC/DOC(2013)7</ref> with the segmented absorber rod replaced by a full length one. | ||
with the segmented absorber rod replaced by a full length one. | |||
== Main Serpent input == | |||
</references> | |||
Revision as of 15:07, 1 December 2015
The input model is based on the Peach Bottom 2 BWR assembly from the UAM benchmark [1] with the segmented absorber rod replaced by a full length one.
Main Serpent input
</references>
- ^ Ivanov et al. "BENCHMARKS FOR UNCERTAINTY ANALYSIS IN MODELLING (UAM) FOR THE DESIGN, OPERATION AND SAFETY ANALYSIS OF LWRs, Volume I: Specification and Support Data for Neutronics Cases (Phase I), Version 2.1", NEA/NSC/DOC(2013)7