Difference between revisions of "Coupled transient tutorial with MSCS"
| Line 23: | Line 23: | ||
'''Initial input for 3x3 rod 3D unit cell''' | '''Initial input for 3x3 rod 3D unit cell''' | ||
<div class="mw-collapsible-content"> | <div class="mw-collapsible-content"> | ||
| − | + | /**************** | |
* Main options * | * Main options * | ||
****************/ | ****************/ | ||
| − | + | ||
% --- Link XS-libraries | % --- Link XS-libraries | ||
| − | + | ||
set acefile "./sss_endfb71.xsdata" | set acefile "./sss_endfb71.xsdata" | ||
| − | + | ||
% --- Neutron population and criticality cycles: | % --- Neutron population and criticality cycles: | ||
| − | + | ||
set pop 10000 50 50 | set pop 10000 50 50 | ||
| − | + | ||
% --- Total power for normalization (1 W): | % --- Total power for normalization (1 W): | ||
| − | + | ||
set power 1 | set power 1 | ||
| − | + | ||
% --- Use reflective boundary condition in XY, black in Z | % --- Use reflective boundary condition in XY, black in Z | ||
| − | + | ||
set bc 2 2 1 | set bc 2 2 1 | ||
| − | + | ||
% --- Add geometry plots | % --- Add geometry plots | ||
| − | + | ||
plot 2 500 1000 | plot 2 500 1000 | ||
plot 3 500 500 | plot 3 500 500 | ||
| − | + | ||
% --- Add mesh plots (flux + fission power) | % --- Add mesh plots (flux + fission power) | ||
| − | + | ||
mesh 3 500 500 | mesh 3 500 500 | ||
mesh 2 500 1000 | mesh 2 500 1000 | ||
| − | + | ||
% --- Temperature mesh plots | % --- Temperature mesh plots | ||
| − | + | ||
mesh 10 3 500 500 | mesh 10 3 500 500 | ||
mesh 10 2 500 1000 | mesh 10 2 500 1000 | ||
| − | + | ||
/******************* | /******************* | ||
* Pin definitions * | * Pin definitions * | ||
*******************/ | *******************/ | ||
| − | + | ||
% --- Empty lattice position: | % --- Empty lattice position: | ||
| − | + | ||
pin 99 | pin 99 | ||
cool | cool | ||
| − | + | ||
% --- Fuel pins (same type but treated separately) | % --- Fuel pins (same type but treated separately) | ||
| − | + | ||
pin 1 | pin 1 | ||
fuel1 0.60579 | fuel1 0.60579 | ||
| Line 74: | Line 74: | ||
Zirc2 0.71501 | Zirc2 0.71501 | ||
cool | cool | ||
| − | + | ||
pin 2 | pin 2 | ||
fuel1 0.60579 | fuel1 0.60579 | ||
| Line 80: | Line 80: | ||
Zirc2 0.71501 | Zirc2 0.71501 | ||
cool | cool | ||
| − | + | ||
% --- Control rod | % --- Control rod | ||
| − | + | ||
pin CR | pin CR | ||
AgInCd 0.43310 | AgInCd 0.43310 | ||
| Line 90: | Line 90: | ||
zirc 0.60198 | zirc 0.60198 | ||
cool | cool | ||
| − | + | ||
% --- Control rod guide thimble | % --- Control rod guide thimble | ||
| − | + | ||
pin GT | pin GT | ||
cool 0.56134 | cool 0.56134 | ||
zirc 0.60198 | zirc 0.60198 | ||
cool | cool | ||
| − | + | ||
% --- Control rod bottom surface | % --- Control rod bottom surface | ||
| − | + | ||
surf sCR pz 0.0 | surf sCR pz 0.0 | ||
| − | + | ||
% --- Move control rod surface to starting position | % --- Move control rod surface to starting position | ||
| − | + | ||
trans s sCR 0 0 -3.54 | trans s sCR 0 0 -3.54 | ||
| − | + | ||
% --- Control rod universe C definition | % --- Control rod universe C definition | ||
| − | + | ||
cell CRb C fill GT -sCR | cell CRb C fill GT -sCR | ||
cell CRt C fill CR sCR | cell CRt C fill CR sCR | ||
| − | + | ||
/*********************** | /*********************** | ||
* Geometry definition * | * Geometry definition * | ||
***********************/ | ***********************/ | ||
| − | + | ||
% --- Assembly lattice | % --- Assembly lattice | ||
| − | + | ||
lat 100 1 0.0 0.0 5 5 2.5 | lat 100 1 0.0 0.0 5 5 2.5 | ||
99 99 99 99 99 | 99 99 99 99 99 | ||
| Line 123: | Line 123: | ||
99 1 2 1 99 | 99 1 2 1 99 | ||
99 99 99 99 99 | 99 99 99 99 99 | ||
| − | + | ||
% --- Geometry boundary (50 cm high cuboid) | % --- Geometry boundary (50 cm high cuboid) | ||
| − | + | ||
surf 9 cuboid -4.6875 4.6875 -4.6875 4.6875 -25 25 | surf 9 cuboid -4.6875 4.6875 -4.6875 4.6875 -25 25 | ||
| − | + | ||
% --- Cell definitions: | % --- Cell definitions: | ||
| − | + | ||
cell 1 0 fill 100 -9 % Pin lattice | cell 1 0 fill 100 -9 % Pin lattice | ||
cell 99 0 outside 9 % Outside world | cell 99 0 outside 9 % Outside world | ||
| − | + | ||
/************************ | /************************ | ||
* Material definitions * | * Material definitions * | ||
************************/ | ************************/ | ||
| − | + | ||
% --- Fuel materials: | % --- Fuel materials: | ||
| − | + | ||
% Fuel1 3.6 wt % enrichment (double density) | % Fuel1 3.6 wt % enrichment (double density) | ||
mat fuel1 -10.307 tmp 300 rgb 100 0 0 | mat fuel1 -10.307 tmp 300 rgb 100 0 0 | ||
| Line 144: | Line 144: | ||
92238.03c -0.84975585 | 92238.03c -0.84975585 | ||
8016.03c -0.11851053 | 8016.03c -0.11851053 | ||
| − | + | ||
% --- "Zircaloy-2" [PNNL-15870, Rev. 1] | % --- "Zircaloy-2" [PNNL-15870, Rev. 1] | ||
% Xe18 commented because of lack of XS data | % Xe18 commented because of lack of XS data | ||
| − | + | ||
mat Zirc2 -6.56 tmp 300 rgb 200 200 200 | mat Zirc2 -6.56 tmp 300 rgb 200 200 200 | ||
8016.03c -1.19376E-03 | 8016.03c -1.19376E-03 | ||
| Line 179: | Line 179: | ||
50122.03c -6.63830E-04 | 50122.03c -6.63830E-04 | ||
50124.03c -8.43778E-04 | 50124.03c -8.43778E-04 | ||
| − | + | ||
% --- Zircaloy for control rod | % --- Zircaloy for control rod | ||
mat zirc -6.56000E+00 tmp 300 rgb 200 200 200 | mat zirc -6.56000E+00 tmp 300 rgb 200 200 200 | ||
| Line 212: | Line 212: | ||
50122.03c -6.63830E-04 | 50122.03c -6.63830E-04 | ||
50124.03c -8.43778E-04 | 50124.03c -8.43778E-04 | ||
| − | + | ||
% --- "Steel, Stainless 304" [PNNL-15870, Rev. 1] | % --- "Steel, Stainless 304" [PNNL-15870, Rev. 1] | ||
| − | + | ||
mat ssteel -8.00000E+00 tmp 300 rgb 100 100 100 | mat ssteel -8.00000E+00 tmp 300 rgb 100 100 100 | ||
6012.03c -3.95366E-04 | 6012.03c -3.95366E-04 | ||
| Line 240: | Line 240: | ||
28062.03c -3.54721E-03 | 28062.03c -3.54721E-03 | ||
28064.03c -9.32539E-04 | 28064.03c -9.32539E-04 | ||
| − | + | ||
% --- AIC from BEAVRS | % --- AIC from BEAVRS | ||
| − | + | ||
mat AgInCd -10.160000 tmp 300 rgb 5 255 5 | mat AgInCd -10.160000 tmp 300 rgb 5 255 5 | ||
Ag-107.03c 2.3523e-02 | Ag-107.03c 2.3523e-02 | ||
| Line 256: | Line 256: | ||
Cd-114.03c 7.8188e-04 | Cd-114.03c 7.8188e-04 | ||
Cd-116.03c 2.0384e-04 | Cd-116.03c 2.0384e-04 | ||
| − | + | ||
% --- Coolant (0% void fraction): | % --- Coolant (0% void fraction): | ||
| − | + | ||
mat cool -0.99999 moder lwtr 1001 tmp 300 rgb 150 150 255 | mat cool -0.99999 moder lwtr 1001 tmp 300 rgb 150 150 255 | ||
1001.03c 0.66667 | 1001.03c 0.66667 | ||
8016.03c 0.33333 | 8016.03c 0.33333 | ||
| − | + | ||
% --- Thermal scattering data for light water: | % --- Thermal scattering data for light water: | ||
| − | + | ||
%(HinH20 at 273K) | %(HinH20 at 273K) | ||
therm lwtr lwj3.00t | therm lwtr lwj3.00t | ||
</div> | </div> | ||
</div> | </div> | ||
Revision as of 11:18, 3 November 2017
This tutorial describes how to use Serpent 2.1.29 to solve a simple reactivity insertion transient for a 3x3 rod unit cell with a central AIC control rod. We will solve the coupled neutronics-fuel temperature problem for an accidental fast removal and return of the control rod. We will not solve heat conduction in the fuel, but will use an adiabatic approximation instead: all heat is modelled as remaining at the place of deposition.
The XY and XZ cuts of the geometry we want to simulate are shown below:
The details of the transient we want to simulate follow: In the beginning of the transient, the system (made critical by soluble boron) is operating at a power level of 1.0 W with the delayed neutron precursors at their stable concentrations. The control rod is removed from the system with an instantaneous upward velocity of 100 000 cm/s, which is maintained until the control rod is completely removed from the geometry. After this, the control rod is inserted back with 5% of the removal speed until the initial position is reached again.
In order to simulate the transient, we will need to first generate the source distributions for neutrons and delayed neutron precursors in the beginning of the transient. As we want to start the transient from the critical state (starting from subcritcal or supercritical states is not currently supported), we will need to create a critical model of our system.
Let's start with the following input:
Colors in the input correspond to:
- Comments
- Control words
- Name definitions
- Name references
Initial input for 3x3 rod 3D unit cell
/**************** * Main options * ****************/ % --- Link XS-libraries set acefile "./sss_endfb71.xsdata" % --- Neutron population and criticality cycles: set pop 10000 50 50 % --- Total power for normalization (1 W): set power 1 % --- Use reflective boundary condition in XY, black in Z set bc 2 2 1 % --- Add geometry plots plot 2 500 1000 plot 3 500 500 % --- Add mesh plots (flux + fission power) mesh 3 500 500 mesh 2 500 1000 % --- Temperature mesh plots mesh 10 3 500 500 mesh 10 2 500 1000 /******************* * Pin definitions * *******************/ % --- Empty lattice position: pin 99 cool % --- Fuel pins (same type but treated separately) pin 1 fuel1 0.60579 void 0.62103 Zirc2 0.71501 cool pin 2 fuel1 0.60579 void 0.62103 Zirc2 0.71501 cool % --- Control rod pin CR AgInCd 0.43310 void 0.43688 ssteel 0.48387 cool 0.56134 zirc 0.60198 cool % --- Control rod guide thimble pin GT cool 0.56134 zirc 0.60198 cool % --- Control rod bottom surface surf sCR pz 0.0 % --- Move control rod surface to starting position trans s sCR 0 0 -3.54 % --- Control rod universe C definition cell CRb C fill GT -sCR cell CRt C fill CR sCR /*********************** * Geometry definition * ***********************/ % --- Assembly lattice lat 100 1 0.0 0.0 5 5 2.5 99 99 99 99 99 99 1 2 1 99 99 2 C 2 99 99 1 2 1 99 99 99 99 99 99 % --- Geometry boundary (50 cm high cuboid) surf 9 cuboid -4.6875 4.6875 -4.6875 4.6875 -25 25 % --- Cell definitions: cell 1 0 fill 100 -9 % Pin lattice cell 99 0 outside 9 % Outside world /************************ * Material definitions * ************************/ % --- Fuel materials: % Fuel1 3.6 wt % enrichment (double density) mat fuel1 -10.307 tmp 300 rgb 100 0 0 92235.03c -0.03173362 92238.03c -0.84975585 8016.03c -0.11851053 % --- "Zircaloy-2" [PNNL-15870, Rev. 1] % Xe18 commented because of lack of XS data mat Zirc2 -6.56 tmp 300 rgb 200 200 200 8016.03c -1.19376E-03 8017.03c -4.83282E-07 24050.03c -4.16117E-05 24052.03c -8.34483E-04 24053.03c -9.64457E-05 24054.03c -2.44600E-05 26054.03c -5.62862E-05 26056.03c -9.16258E-04 26057.03c -2.15389E-05 26058.03c -2.91667E-06 28058.03c -3.35317E-04 28060.03c -1.33612E-04 28061.03c -5.90496E-06 28062.03c -1.91358E-05 28064.03c -5.03067E-06 40090.03c -4.98111E-01 40091.03c -1.09835E-01 40092.03c -1.69731E-01 40094.03c -1.75753E-01 40096.03c -2.89183E-02 50112.03c -1.27668E-04 50114.03c -8.84175E-05 50115.03c -4.59485E-05 50116.03c -1.98205E-03 50117.03c -1.05596E-03 50118.03c -3.35857E-03 50119.03c -1.20129E-03 50120.03c -4.59450E-03 50122.03c -6.63830E-04 50124.03c -8.43778E-04 % --- Zircaloy for control rod mat zirc -6.56000E+00 tmp 300 rgb 200 200 200 8016.03c -1.19376E-03 8017.03c -4.83282E-07 24050.03c -4.16117E-05 24052.03c -8.34483E-04 24053.03c -9.64457E-05 24054.03c -2.44600E-05 26054.03c -5.62862E-05 26056.03c -9.16258E-04 26057.03c -2.15389E-05 26058.03c -2.91667E-06 28058.03c -3.35317E-04 28060.03c -1.33612E-04 28061.03c -5.90496E-06 28062.03c -1.91358E-05 28064.03c -5.03067E-06 40090.03c -4.98111E-01 40091.03c -1.09835E-01 40092.03c -1.69731E-01 40094.03c -1.75753E-01 40096.03c -2.89183E-02 50112.03c -1.27668E-04 50114.03c -8.84175E-05 50115.03c -4.59485E-05 50116.03c -1.98205E-03 50117.03c -1.05596E-03 50118.03c -3.35857E-03 50119.03c -1.20129E-03 50120.03c -4.59450E-03 50122.03c -6.63830E-04 50124.03c -8.43778E-04 % --- "Steel, Stainless 304" [PNNL-15870, Rev. 1] mat ssteel -8.00000E+00 tmp 300 rgb 100 100 100 6012.03c -3.95366E-04 % 6013.03c -4.63372E-06 14028.03c -4.59332E-03 14029.03c -2.41681E-04 14030.03c -1.64994E-04 15031.03c -2.30000E-04 16032.03c -1.42073E-04 16033.03c -1.15681E-06 16034.03c -6.75336E-06 16036.03c -1.68255E-08 24050.03c -7.93000E-03 24052.03c -1.59029E-01 24053.03c -1.83798E-02 24054.03c -4.66139E-03 25055.03c -1.00000E-02 26054.03c -3.96166E-02 26056.03c -6.44901E-01 26057.03c -1.51600E-02 26058.03c -2.05287E-03 28058.03c -6.21579E-02 28060.03c -2.47678E-02 28061.03c -1.09461E-03 28062.03c -3.54721E-03 28064.03c -9.32539E-04 % --- AIC from BEAVRS mat AgInCd -10.160000 tmp 300 rgb 5 255 5 Ag-107.03c 2.3523e-02 Ag-109.03c 2.1854e-02 In-113.03c 3.4291e-04 In-115.03c 7.6504e-03 Cd-106.03c 3.4019e-05 Cd-108.03c 2.4221e-05 Cd-110.03c 3.3991e-04 Cd-111.03c 3.4835e-04 Cd-112.03c 6.5669e-04 Cd-113.03c 3.3257e-04 Cd-114.03c 7.8188e-04 Cd-116.03c 2.0384e-04 % --- Coolant (0% void fraction): mat cool -0.99999 moder lwtr 1001 tmp 300 rgb 150 150 255 1001.03c 0.66667 8016.03c 0.33333 % --- Thermal scattering data for light water: %(HinH20 at 273K) therm lwtr lwj3.00t
