Kharon input manual

The Kharon input is a keyword input. It consists of several grouped input parameters. Each group starts with the keyword that defines the group (name of the group), possibly followed by data entries associated with the keyword. The group can consist of several keyword (parameter name) and value pairs that are enclosed within a set of curly brackets.

• A working input file consists of several input groups.

• The order of the groups or the parameter name and value pairs within the group is not important.

• The input file can contain comments: all characters after '#', '!', and '%' on each line are considered as comments.

• All keywords, operators, and data entries must be separated by one or more spaces or line changes, since they are regarded as words.

Input groups

Simulation control parameters

The keyword that defines this group is simulationControl. The following parameters can be set inside this group. The bare minimum is to provide a value for the number of phases, nPhases.

Keyword	Size and type	Valid options	Default	Description
nPhases	1*integer	1 = single-phase water or 2 = water and steam		Number of phases.
nIterMax	1*integer	positive integer	500	Number of solution (outer) iterations.
urfU	1*real	[0, 1]	0.5	Under-relaxation factor for velocity [-].
urfP	1*real	[0, 1]	0.5	Under-relaxation factor for pressure [-].
urfH	1*real	[0, 1]	0.9	Under-relaxation factor for enthalpy [-].
gravity	1*real	[$-\infty$, $\infty$]	-9.81	Gravitational acceleration (in the direction of positive z-coordinate; upwards) [m/s2]
readRestart	1*integer	0 = No, 1 = Yes	0	Start from a previously saved state?
standAlone	1*integer	0 = Multiphysics coupling, 1 = Stand-alone simulation	0	Start a stand-alone simulation?
writeFormat	1*word	ascii, binary	ascii	Write format for output fields
materialProperties	1*word	libTable, libFluid	libTable	Calculation of material properties: libTable = linear interpolation from a pretabulated set of material properties, libFluid = IAPWS standard polynomial functions.
thermalBC	1*word	power, heatFlux, wallTemperature	heatFlux	Thermal boundary condition: power = set the power to each cell (Kharon converts this to heat flux and calculates the surface temperature distribution), heatFlux = set the heat flux of the heated surfaces in each cell (Kharon converts this to power and calculates the surface temperature distribution), wallTemperature = set the surface temperature of the heated surfaces in each cell (Kharon calculates the heat flux and power distributions).

Inlet definition

The keyword that defines this group is inlet.

Keyword	Size and type	Valid options	Default	Description
nPhases	1*integer	1 = single-phase water or 2 = water and steam		Number of phases.
nIterMax	1*integer	positive integer	500	Number of solution (outer) iterations.