SMR startup simulation (outdated)
Contents
Overview
In order to test and demonstrate the time dependent calculation capabilities of the Kraken framework in a reasonably realistic context, a time dependent simulation was conducted of the initial rise to power of a small modular reactor (SMR) core. The simulation used the Ants nodal neutronics code to resolve the evolution of neutronics and the xenon fission poison chain in the system and the SUBCHANFLOW thermal hydraulics code to solve the coolant flow and heat transfer in fuel rods.
All of the input files are included as one archive here: File:SMR startup.tgz
The modelled SMR is the same 37 assembly Er-UO2 fuelled core that has been previously used for the demonstration of the depletion capabilities of Kraken:
The transient starts from critical hot zero power (HZP) conditions (actually from 1 % power level) with all control rod banks at approximately 50 % insertion. The boron concentration in the coolant corresponds to the critical boron at all rods out (ARO) hot full power (HFP) conditions. The control rods are withdrawn from the core in a stepwise manner over 38 hours to allow for the accumulation of xenon in the core:
To reformulate the simulation setup:
- Evaluate (in a time-independent simulation) critical boron at hot full power all rods out conditions with convergence in
- Neutronics
- Thermal hydraulics
- Fuel temperature
- Xenon
- Using that critical boron, evaluate (in a time-independent simulation) critical control rod position at 1 % power level with convergence in
- Neutronics
- Thermal hydraulics
- Fuel temperature
- Xenon
- Save initial conditions from the 1 % power level time-independent calculation.
- Start a time dependent simulation from 1 % power level and slowly withdraw the control rods fully from the core.
If the time-independent and time-dependent calculation methodologies produce equivalent steady state solutions and have been correctly implemented, the simulation should (in the end) end up in the same state as the time-independent HFP ARO calculation.
Evaluating HFP ARO critical boron
The first part of the simulation is only needed here in order to obtain a more realistic and reasonable end state for the transient simulation by finding a realistic boron concentration for the coolant. The simulation is set up as a normal coupled steady state simulation between Ants and SUBCHANFLOW with Ants using its equilibrium xenon calculation mode and iterating the coolant boron concentration to reach a critical system. The system power is set to 50 MW, which corresponds to the nominal full power in the Er-UO2 core.
The Cerberus input used for the calculation is included below and is a rather simple coupled calculation input. It may be interesting to note that since Ants is developed in the Kraken context, many of the basic input data can be sent to Ants via Cerberus (control rod positions, system power, xenon calculation mode, iteration mode etc.). The same Ants input is actually used for all of the simulations here with the relevant parts of the Ants model being modified via Cerberus instead of in the Ants input file. Conversely, as SUBCHANFLOW is developed by KIT and the Kraken-coupling is achieved via a VTT written SUBCHANFLOW wrapper the amount of possible input data accessible via Cerberus is more limited and the steady state simulations use a (very slightly) different input file for SUBCHANFLOW than the transient simulation.
Cerberus input for HPF ARO boron iteration
from os import environ from pathlib import Path import numpy as np import cerberus as cb from cerberus.solvers import CodeInput from cerberus.solvers import Solver from cerberus.interpolation import Interpolator from numpy.core.fromnumeric import size # Verbosity for terminal output of Cerberus cb.LOG.set_verbosity(1) # Create and start solvers solver_defs = [["SCF", environ["SCFWRAP_EXE_PATH"], [], ["../Inputs/scf/input_steady.txt"]], ["ANTS", environ["ANTS_EXE_PATH"], ["--cerberus","--port"], ["../Inputs/Ants.inp"]]] solvers = {} port_number = 2211 for name, solver_path, params, inputs in solver_defs: # Create input solver_input = CodeInput(name, inputs) # Create solver solver = Solver(name, solver_path, params) solver.input = solver_input solver.initialize(port_number) # Add to solver dict solvers[name] = solver port_number += 1 # Alias variables for solvers scf = solvers["SCF"] ants = solvers["ANTS"] # Get SCF fields needed for coupled calculation scf_cool_temperature = scf.get_transferrable("scf_of_cool_temperature_chan") scf_cool_density = scf.get_transferrable("scf_of_cool_density_chan") scf_fuel_temperature = scf.get_transferrable("scf_of_fuel_temperature_vol_ave") scf_power = scf.get_transferrable("scf_if_fuel_power") # Get Ants fields needed for coupled calculation ants_cool_temperature = ants.get_transferrable("Ants_if_coolant_temperature") ants_cool_density = ants.get_transferrable("Ants_if_coolant_density") ants_fuel_temperature = ants.get_transferrable("Ants_if_fuel_temperature") ants_power = ants.get_transferrable("Ants_of_supernode_power") ants_boron = ants.get_transferrable("Ants_ov_boron") # Create interpolators that handle data transfer between SCF and Ants interp_ct = Interpolator.from_file(scf_cool_temperature, ants_cool_temperature, "../Inputs/scf_to_ants.txt") interp_cd = Interpolator.from_file(scf_cool_density, ants_cool_density, "../Inputs/scf_to_ants.txt") interp_ft = Interpolator.from_file(scf_fuel_temperature, ants_fuel_temperature, "../Inputs/scf_to_ants.txt") interp_p = Interpolator.from_file(ants_power, scf_power, "../Inputs/ants_to_scf.txt") ################################################################################ # Setup some options for the Ants model # 100 % power level (50 MW) tra = ants.get_transferrable("Ants_iv_total_power") tra.value_vec[0] = 50e6 tra.communicate() # Equilibrium xenon (0 = zero, 1 = fixed, 2 = equilibrium, 3 = dynamic, 4 = depletion) tra = ants.get_transferrable("Ants_iv_xenon_state") tra.value_vec[0] = 2 tra.communicate() # Control variable (iterate keff (1) or boron (2)?), here boron tra = ants.get_transferrable("Ants_iv_control_variable") tra.value_vec[0] = 2 tra.communicate() # Initial value for keff tra = ants.get_transferrable("Ants_iv_keff") tra.value_vec[0] = 1.0 tra.communicate() # Initial value for boron (ppm) tra = ants.get_transferrable("Ants_iv_boron") tra.value_vec[0] = 200.0 tra.communicate() # Control rod position height = 200.0 names = ["Ants_iv_cr_bank_height_CR2.1", "Ants_iv_cr_bank_height_CR2.2", "Ants_iv_cr_bank_height_CR2.3", "Ants_iv_cr_bank_height_CR2.4", "Ants_iv_cr_bank_height_CR4.1", "Ants_iv_cr_bank_height_CR4.2", "Ants_iv_cr_bank_height_CR4.3", "Ants_iv_cr_bank_height_CR4.4", "Ants_iv_cr_bank_height_CR6.1", "Ants_iv_cr_bank_height_CR6.2", "Ants_iv_cr_bank_height_CR6.3", "Ants_iv_cr_bank_height_CR6.4", "Ants_iv_cr_bank_height_CR6.5", "Ants_iv_cr_bank_height_CR6.6", "Ants_iv_cr_bank_height_CR6.7", "Ants_iv_cr_bank_height_CR6.8"] for name in names: tra = ants.get_transferrable(name) tra.value_vec[0] = height tra.communicate() ################################################################################ # Initialize SCF power field (50 MW divided uniformly over SCF cells) scf_power.value_vec = 50e6/scf_power.n_values*np.ones(scf_power.n_values) ################################################################################ ################################################################################ # --- Coupled solution max_iter = 50 for i in range(max_iter): # --- TH solution and communication scf_power.communicate() scf_power.write_simple(suffix_in=f"{i+1}") scf.solve() scf_cool_density.communicate() scf_cool_temperature.communicate() scf_fuel_temperature.communicate() # --- Transfers from SCF to Ants fields interp_ct.interpolate() interp_cd.interpolate() interp_ft.interpolate() # --- Neutronics solution and communication ants_cool_density.communicate() ants_cool_temperature.communicate() ants_fuel_temperature.communicate() ants.solve() ants_power.communicate() ants_boron.communicate() # --- Transfers from Ants to SCF interp_p.interpolate() print(f"Finished iteration {i+1}, boron is {ants_boron.value_vec[0]}") # Choose field/value names to save # (save HFP steady state fields so that we can compare our transient final state # to them) to_save = ["Ants_ov_keff", "Ants_ov_boron", "Ants_if_fuel_temperature", "Ants_if_coolant_temperature", "Ants_if_coolant_density", "Ants_of_power", "Ants_of_number_density_xe135", "Ants_of_number_density_i135"] # Output path. Create folder if necessary output_path = Path(f"./output") output_path.mkdir(exist_ok=True) for name in to_save: tra = ants.get_transferrable(name) tra.communicate() tra.write_simple(suffix_in="final", folder_path=output_path)
As we can see from the Cerberus output, the coupled boron iteration convergences in a fast an orderly manner:
Part of Cerberus output for HPF ARO boron iteration
[...] Finished iteration 1, boron is 228.22516244204832 Finished iteration 2, boron is 230.30442058650905 Finished iteration 3, boron is 183.3051192619623 Finished iteration 4, boron is 164.65050546552237 Finished iteration 5, boron is 157.30379476200793 Finished iteration 6, boron is 154.4821237790289 Finished iteration 7, boron is 153.3938241369474 Finished iteration 8, boron is 152.97112777867784 Finished iteration 9, boron is 152.8055417631124 Finished iteration 10, boron is 152.74065234503502 Finished iteration 11, boron is 152.7152600677249 Finished iteration 12, boron is 152.70531858398897 Finished iteration 13, boron is 152.70142257951275 Finished iteration 14, boron is 152.69989492716115 Finished iteration 15, boron is 152.69929592230528 Finished iteration 16, boron is 152.69906109692272 Finished iteration 17, boron is 152.698969052524 Finished iteration 18, boron is 152.69893297541552 Finished iteration 19, boron is 152.6989188350122 Finished iteration 20, boron is 152.69891329275947 Finished iteration 21, boron is 152.6989111207322 Finished iteration 22, boron is 152.69891026952354 Finished iteration 23, boron is 152.69890993601513 Finished iteration 24, boron is 152.698909805322 Finished iteration 25, boron is 152.6989097541711 Finished iteration 26, boron is 152.69890973416008 Finished iteration 27, boron is 152.69890972649966 Finished iteration 28, boron is 152.6989097235083 Finished iteration 29, boron is 152.69890972243354 Finished iteration 30, boron is 152.6989097220775 Finished iteration 31, boron is 152.69890972200204 Finished iteration 32, boron is 152.69890972199858 Finished iteration 33, boron is 152.6989097220187 Finished iteration 34, boron is 152.69890972213608 Finished iteration 35, boron is 152.69890972224186 Finished iteration 36, boron is 152.69890972236064 Finished iteration 37, boron is 152.69890972247714 Finished iteration 38, boron is 152.69890972253432 Finished iteration 39, boron is 152.69890972256997 Finished iteration 40, boron is 152.69890972269314 Finished iteration 41, boron is 152.6989097228652 Finished iteration 42, boron is 152.6989097229433 Finished iteration 43, boron is 152.69890972308616 Finished iteration 44, boron is 152.6989097232077 Finished iteration 45, boron is 152.69890972335665 Finished iteration 46, boron is 152.6989097234828 Finished iteration 47, boron is 152.69890972353284 Finished iteration 48, boron is 152.6989097236028 Finished iteration 49, boron is 152.69890972373645 Finished iteration 50, boron is 152.69890972385272
The critical boron for hot full power conditions is thus 152.69890972385272 ppm, which we can use as the coolant boron concentration for the second and third parts of the demonstration.
Evaluating critical control rod position at HZP fixed boron conditions
Cerberus input for HZP control rod iteration
Part of Cerberus output for HZP control rod iteration
[...] Height is 150.0, keff is 1.0137994157229595 (based on 3 coupled iterations) Height is 140.0, keff is 1.0097132150307848 (based on 3 coupled iterations) Height is 130.0, keff is 1.004371680638068 (based on 3 coupled iterations) Height is 120.0, keff is 0.9974297441040372 (based on 3 coupled iterations) Height is 121.0, keff is 0.997992947986957 (based on 6 coupled iterations) Height is 122.0, keff is 0.9986113787463294 (based on 6 coupled iterations) Height is 123.0, keff is 0.999327881570897 (based on 6 coupled iterations) Height is 124.0, keff is 1.000166398442108 (based on 6 coupled iterations) Height is 123.9, keff is 1.0000762007919366 (based on 9 coupled iterations) Height is 123.80000000000001, keff is 0.9999875162017355 (based on 9 coupled iterations) Height is 123.81000000000002, keff is 0.9999963183709505 (based on 12 coupled iterations) Height is 123.82000000000002, keff is 1.00000513516873 (based on 12 coupled iterations) Height is 123.81900000000002, keff is 1.0000042528284148 (based on 15 coupled iterations) Height is 123.81800000000001, keff is 1.000003370634821 (based on 15 coupled iterations) Height is 123.81700000000001, keff is 1.0000024885879013 (based on 15 coupled iterations) Height is 123.816, keff is 1.0000016066876227 (based on 15 coupled iterations) Height is 123.815, keff is 1.0000007249339529 (based on 15 coupled iterations) Height is 123.814, keff is 0.9999998433268541 (based on 15 coupled iterations) Height is 123.8141, keff is 0.9999999314800674 (based on 18 coupled iterations)
Saving initial conditions for the transient
Cerberus input for the transient simulation