UGM 2016 Moving geometry

From Serpent Wiki
Revision as of 02:07, 27 September 2016 by Ville Valtavirta (Talk | contribs) (Time limits for transformations)

Jump to: navigation, search

This page will contain stuff for the moving geometry example for the UGM 2016 presentation.

Basics of transformations

Control rod initial position.
Control rod movement. Initial upwards velocity of 750 cm/s. Initial downwards acceleration of 981 m/s^2. Simulation time of 2 seconds with 500 time intervals.

Time limits for transformations

transa s s2 tlim 0.1 0.5 1 0 0 1000.0

transa s s2 tlim 0.5 0.9 1 0 0 -1000.0

Control rod movement. Upwards acceleration of 1000 cm/s^2 from 0.1 to 0.5 seconds followed by downwards acceleration of 1000 cm/s^2 from 0.5 to 0.9. Simulation time of 2 seconds with 250 time intervals. Ttype 1.
transa s s2 tlim 0.1 0.5 2 0 0 1000.0

transa s s2 tlim 0.5 0.9 2 0 0 -1000.0

Control rod movement. Upwards acceleration of 1000 cm/s^2 from 0.1 to 0.5 seconds followed by downwards acceleration of 1000 cm/s^2 from 0.5 to 0.9. Simulation time of 2 seconds with 250 time intervals. Ttype 2.
transa s s2 tlim 0.1 0.5 3 0 0 1000.0

transa s s2 tlim 0.5 0.9 3 0 0 -1000.0

Control rod movement. Upwards acceleration of 1000 cm/s^2 from 0.1 to 0.5 seconds followed by downwards acceleration of 1000 cm/s^2 from 0.5 to 0.9. Simulation time of 2 seconds with 250 time intervals. Ttype 3.