UGM 2016 Moving geometry

From Serpent Wiki
Revision as of 12:33, 23 September 2016 by Ville Valtavirta (Talk | contribs)

Jump to: navigation, search

This page will contain stuff for the moving geometry example for the UGM 2016 presentation.

Control rod initial position.
Control rod movement. Initial upwards velocity of 750 cm/s. Initial downwards acceleration of 981 m/s^2. Simulation time of 2 seconds with 500 time intervals.
Control rod movement. Upwards acceleration of 1000 cm/s^2 from 0.1 to 0.5 seconds followed by downwards acceleration of 1000 cm/s^2 from 0.5 to 0.9. Simulation time of 2 seconds with 250 time intervals.
Control rod movement. Upwards acceleration of 1000 cm/s^2 from 0.1 to 0.5 seconds followed by downwards acceleration of 1000 cm/s^2 from 0.5 to 0.9. Simulation time of 2 seconds with 250 time intervals.
Control rod movement. Upwards acceleration of 1000 cm/s^2 from 0.1 to 0.5 seconds followed by downwards acceleration of 1000 cm/s^2 from 0.5 to 0.9. Simulation time of 2 seconds with 250 time intervals.