Difference between revisions of "FINIX PB2 example input"

From Serpent Wiki
Jump to: navigation, search
(Created page with "The input model is based on the Peach Bottom 2 BWR assembly from the UAM benchmark <ref>Ivanov et al. "''BENCHMARKS FOR UNCERTAINTY ANALYSIS IN MODELLING (UAM) FOR THE DESIGN,...")
 
Line 1: Line 1:
 
The input model is based on the Peach Bottom 2 BWR assembly from the UAM benchmark
 
The input model is based on the Peach Bottom 2 BWR assembly from the UAM benchmark
<ref>Ivanov et al. "''BENCHMARKS FOR UNCERTAINTY ANALYSIS IN MODELLING (UAM) FOR THE DESIGN, OPERATION AND SAFETY ANALYSIS OF LWRs, Volume I: Specification and Support Data for Neutronics Cases (Phase I), Version 2.1''", NEA/NSC/DOC(2013)7</ref>  
+
<ref>Ivanov et al. "''BENCHMARKS FOR UNCERTAINTY ANALYSIS IN MODELLING (UAM) FOR THE DESIGN, OPERATION AND SAFETY ANALYSIS OF LWRs, Volume I: Specification and Support Data for Neutronics Cases (Phase I), Version 2.1''", NEA/NSC/DOC(2013)7</ref> with the segmented absorber rod replaced by a full length one.
with the segmented absorber rod replaced by a full length one.
+
 
 +
== Main Serpent input ==
 +
 
 +
</references>

Revision as of 14:07, 1 December 2015

The input model is based on the Peach Bottom 2 BWR assembly from the UAM benchmark [1] with the segmented absorber rod replaced by a full length one.

Main Serpent input

</references>