Difference between revisions of "Dynamic external source simulation mode"

From Serpent Wiki
Jump to: navigation, search
Line 1: Line 1:
 
The dynamic simulation mode allows running external source simulations in sub- and super-critical systems over extended time periods, while keeping the simulated population size within reasonable limits. The methodology is based on sequential population control, as described in a conference paper presented at M&C 2013.<ref>Leppänen, J. ''"Development of a dynamic simulation mode in the Serpent 2 Monte Carlo code."'' In proc. M&C 2013, Sun Valley, ID, May 5-9, 2013.</ref>  
 
The dynamic simulation mode allows running external source simulations in sub- and super-critical systems over extended time periods, while keeping the simulated population size within reasonable limits. The methodology is based on sequential population control, as described in a conference paper presented at M&C 2013.<ref>Leppänen, J. ''"Development of a dynamic simulation mode in the Serpent 2 Monte Carlo code."'' In proc. M&C 2013, Sun Valley, ID, May 5-9, 2013.</ref>  
  
The mode is invoked by linking a [[input syntax manual#tme (time binning definition)|time bin structure]] in the [[input syntax manual#set nps|set nps]] card. The simulation is divided in time intervals, as defined by the bin structure. The size of the simulated population is adjusted at each bin boundary to match the starting population, and the total population weight is preserved.  
+
The mode is invoked by linking a [[input syntax manual#tme (time binning definition)|time bin structure]] in the [[input syntax manual#set nps|set nps]] card. The simulation is divided in time intervals, as defined by the bin structure. The size of the simulated population is adjusted at each bin boundary to match the starting population, and the total weight is preserved.  
  
Example inputs for the [[M&C 2013 example inputs|fast system]]
+
Example MCNP and Serpent inputs from the M&C 2013 paper are provided [[M&C 2013 example inputs|here]]. The two calculation cases are:
 +
* Fast system (Pu-flattop)
 +
* Thermal system (uranium solution in container)
  
 
== References ==
 
== References ==
  
 
<references/>
 
<references/>

Revision as of 17:48, 26 November 2015

The dynamic simulation mode allows running external source simulations in sub- and super-critical systems over extended time periods, while keeping the simulated population size within reasonable limits. The methodology is based on sequential population control, as described in a conference paper presented at M&C 2013.[1]

The mode is invoked by linking a time bin structure in the set nps card. The simulation is divided in time intervals, as defined by the bin structure. The size of the simulated population is adjusted at each bin boundary to match the starting population, and the total weight is preserved.

Example MCNP and Serpent inputs from the M&C 2013 paper are provided here. The two calculation cases are:

  • Fast system (Pu-flattop)
  • Thermal system (uranium solution in container)

References

  1. ^ Leppänen, J. "Development of a dynamic simulation mode in the Serpent 2 Monte Carlo code." In proc. M&C 2013, Sun Valley, ID, May 5-9, 2013.